From 1 June 2026, a defined group of zero-emission goods vehicles in Great Britain is treated as Class 7 for MOT purposes. Vehicles with a design gross weight (DGW) between 3,501kg and 4,250kg move out of the heavy-vehicle roadworthiness-testing framework and into the Class 7 MOT scheme.
For operators, that changes where the vehicle should be booked and which inspection standards apply. It does not, by itself, create an automatic retest on the changeover date. The change is set out in DVSA’s MOT Special Notice 01-26 and given legal effect by The Goods Vehicles (Testing, Drivers’ Hours and Tachographs etc.) (Amendment) Regulations 2026.
Which vehicles are included?
This is narrower than a rule covering every electric van. The vehicle must be:
- a goods vehicle;
- zero-emission; and
- officially classified with a DGW, or maximum permissible mass, between 3,501kg and 4,250kg.
DVSA gives electric panel vans, flatbeds, tippers and box vans as examples of vehicles that can fall within the change. Hybrid vehicles are not included.
The measure applies in England, Scotland and Wales. It does not apply in Northern Ireland. Operators should check the vehicle’s official weight classification and registration records rather than relying on its current payload or simply describing it as an electric van. DVSA’s operator reminder sets out the scope.
Where should the MOT be booked?
Affected vehicles should be booked at a Class 7 MOT test centre, rather than at an authorised testing facility used for heavy-vehicle tests. DVSA says the change provides access to more than 6,000 Class 7 test centres, giving operators a different and potentially wider booking network.
The first Class 7 MOT is due three years after the vehicle’s first registration. A vehicle that has already had a heavy-vehicle test before the change does not need another MOT immediately solely because it has been reclassified. Its existing test history and actual due date still need to be checked.
What inspection points matter?
The Class 7 inspection rules include a 1.6mm minimum tyre-tread requirement for the affected vehicles. They also set out applicable speed-limiter requirements for certain N2-category zero-emission vehicles capable of more than 90km/h (56mph).
The word applicable is important: the speed-limiter requirement does not automatically apply in the same way to every vehicle in the weight band. Fleet operators should check the vehicle’s category and, if they are unsure about tyre condition or limiter compliance, seek advice from a qualified tester before the MOT. The relevant detail is covered in DVSA’s MOT inspection-manual updates.
MOT is not the only change on 1 June
Separate drivers’ hours and tachograph changes also apply to qualifying zero-emission goods vehicles operating solely within Great Britain. In most circumstances, they are treated more like internal-combustion-engine vans up to 3,500kg.
That treatment is not universal. Towing, certain types of use and international journeys can bring different requirements into effect. A vehicle’s Class 7 MOT status therefore does not, on its own, answer the separate question of whether drivers’ hours or tachograph rules apply. Operators should check DVSA’s testing reminder alongside its tachograph special notice.
Practical checklist for operators
- Confirm that the vehicle is zero-emission, is registered as a goods vehicle and falls within the 3,501kg to 4,250kg official weight band.
- Check the first-registration date and any previous heavy-vehicle test history.
- Use a Class 7 MOT centre for the relevant test rather than a heavy-vehicle testing facility.
- Review tyre tread and any speed-limiter requirements that apply to the vehicle’s category.
- Check drivers’ hours and tachograph obligations separately if the vehicle tows, has a specific use or travels internationally.
- Do not apply this Great Britain change to vehicles operating under Northern Ireland’s separate arrangements.
For the vehicles covered, this is a move between testing systems rather than an exemption from roadworthiness testing. The crucial details are the official weight classification, the vehicle’s test history and the separate rules governing how it is used.







